Advertisement

You're blocking ads, which pay for BlenderNation. Read about other ways to support us.

sphereneMAKE infill generator for makers [non-blender]

2

Daniel Bachmann writes:

Hi there!
This one is for the makers, tinkerers, hackers and sculpters among us, using Blender and other 3D software to create things, sculptures or just having fun 3D printing 3D models.

See sphereneMAKE in action:

sphereneMAKE alpha is a web-based service (for now), infilling your 3D model with a unique structure we call ADMS, Adaptive Density Minimal Surface. It supports your 3D model from the inside using minimal material while still maintaining enough strength and printd in all 3D printing materials and printing methods. You only need to add outer support structures if needed.

sphereneMAKE is open for free alpha testing.

Upload an OBJ file and receive it back "infilled" then, slice it in your favorite slicing software. We calibrated everything so that you can print the results on FDM with a 0.4mm nozzle and therefore also should be printable in SLA, SLS, SLM.

We made sphereneMAKE to provide access to our Autonomous Design Technology, that is normaly used in engineering, to the maker community since we are makers too and are exited what artists do with it.

Have fun and keep on blending and making!

Greetings from switzerland,
Daniel

About the Author

Daniel Bachmann

Creative Technologist at spherene AG

2 Comments

    • Daniel Bachmann on

      Yes, this is a minimal surface it has two volumes and one surface. I suggest putting 4 holes, 2 per volume as outlet and 2 per volume for air. Have fun and show your results on our discord channel, link on the spherene make website. Cheers, Daniel

Leave A Reply

To add a profile picture to your message, register your email address with Gravatar.com. To protect your email address, create an account on BlenderNation and log in when posting a message.

Advertisement

×